DTM-800B High-Speed Automatic Double Twist Bunching Machine: Specifications, Applications and Latest Delivery
Nov 19, 2026|
View:14Quick Answer: The DTM-800B is a high-speed automatic double twist bunching machine from Jiangsu Handing Cable Machinery Co., Ltd. for precision conductor stranding of electronic cables. It takes 0.38–1.04 mm single copper or tinned copper wire and strands it into 0.8–16 mm² conductors onto Φ800 mm take-up reels. A synchronous belt drive, PLC + HMI control, closed-loop automatic tension control and S/Z direction switching on the fly make it suitable for computer flat cables, network cables, earphone wire, telephone wire and automotive wiring harnesses.
Recently, the DTM-800B high-speed automatic double twist bunching machine from Jiangsu Handing Cable Machinery Co., Ltd. has completed commissioning, factory inspection and protective packaging, and has been loaded for delivery to the customer's factory.
Designed for conductor stranding of precision electronic cables, this model delivers stable and efficient stranding solutions for enterprises engaged in electronic communication and automotive wiring harnesses.
Details are introduced in six sections: key parameters, machine functions, process advantages, applications, delivery and commissioning, and recommended machines:
1. Key Parameters: What Does the DTM-800B Cover?
The machine is specified by reel size, applicable single wire diameter and stranding cross-sectional area, so that the configuration can be matched to the conductor range of each project:
| Parameter | DTM-800B Double Twist Bunching Machine |
|---|---|
| Take-up Reel Size | Φ800 mm |
| Applicable Single Wire Diameter | 0.38–1.04 mm |
| Stranding Cross-sectional Area | 0.8–16 mm² |
| Drive Structure | synchronous belt drive |
| Control System | PLC + HMI touch screen |
| Stranding Direction | S/Z, freely switchable |
| Spindle Cooling | Circulating oil cooling for long-term continuous operation |
| Tension Control | Closed-loop automatic tension control, empty reel to full reel |
| Monitoring | Wire break detection and fault alarm with automatic stop |
Stranding Range
0.8 – 16 mm²
Single wires of 0.38–1.04 mm stranded into 0.8–16 mm² flexible conductors on Φ800 mm reels, covering mainstream electronic, network and automotive cable constructions.
2. Machine Functions: What Can the DTM-800B Do in Production?
The machine covers the full sequence from multi-wire payoff to finished conductor, with process parameters set from the operation panel:
Closed-loop automatic tension control: Tension is controlled adaptively from empty reel to full reel, and tension parameters can be adjusted without stopping the machine, so thin copper wires are not overstretched.
Straight-through wire passage: The direct wire path reduces bending friction of wires and protects the wire surface during high-speed running.
Wire break detection and fault alarm: Built-in detection automatically stops the machine for protection once wire breakage occurs, limiting scrap and protecting the wire path.
One-click HMI setting: Lay length, rotating speed and stranding direction are set together from the intuitive HMI touch screen, supporting free switching between S/Z stranding directions.
Quick specification changeover: Fast parameter changeover reduces downtime for product switching between different cable types and orders.
3. Process Advantages: Which Quality Risks Are Controlled?
Stable lay length and balanced tension are the two keys to a qualified bunched conductor, and both are addressed by the machine design:
Higher precision with synchronous belt drive: Minimal transmission clearance, low operating noise and stable lay length tolerance ensure consistent finished conductors, with fewer defects such as strand jumping and wire loosening.
Closed-loop constant tension for controllable yield : Tension follows automatically during operation to prevent thin copper wires from being overstretched, ideal for fine wires and precision electronic cable production.
Reliable for continuous production: Circulating oil cooling for the spindle keeps temperature rise low during long-hour high-speed operation with a low failure rate, suitable for mass continuous production.
Easy operation and maintenance: Visual parameter setting and complete protection functions lower the technical requirement for operators and cut production losses caused by shutdowns.
4. Applications: Which Cable Types Does It Serve?
The DTM-800B is mainly used for precision stranding of multiple bare copper wires and tinned copper wires. Multiple single wires are neatly twisted into flexible conductors to ensure roundness and uniform conductivity.
It meets the conductor process requirements of high-end wires such as computer flat cables, audio earphone wires, communication telephone wires, network data cables and automotive wiring harnesses. It improves the flexibility and bending resistance of cables and ensures stable signal transmission.
Fine-wire electronic cable makers– where 0.38–1.04 mm single wire must be bunched without overstretching or surface damage.
Network and data cable producers– where lay length consistency directly affects impedance and signal performance.
Automotive harness suppliers – where flexibility and bending resistance of the conductor matter for routing in vehicles.
Factories running mixed orders– one machine covers electronic wire, network cable and automotive wire, reducing changeover between product families.
5. Delivery and Commissioning: What Happens Before and After Shipment?
Before shipment, the machine goes through commissioning, factory inspection and protective packaging, and is then loaded for transport to the customer's plant.

The DTM-800B, wrapped in protective film on a wooden base, is loaded into the container at the Handing plant in Changzhou.
After arrival at the customer's site, Handing provides installation and commissioning follow-up so the customer can start production quickly, boost the output and quality of precision electronic cables, and jointly explore the electronic wiring harness and communication cable market.

Factory inspection and protective packaging are completed before loading, so the machine arrives ready for installation and commissioning.
6. Recommended Machines: Which Double Twist Models Fit Other Conductor Ranges?
The DTM-800B covers precision electronic conductors up to 16 mm². For larger copper conductors and power cable stranding, two double twist models from the same product family are recommended:

D Type Double Twist Bunching Machine
Specially used for twisting aluminum and copper round compressed conductors, with higher twisting efficiency and accurate control of twist distance and tension.
View Details
DTE-DA Double Twist Bunching Machine
Designed for twisting 19/37/61 wires in power cable production. Single bow technology significantly reduces energy consumption, an optimal choice to replace rigid and cage stranding machines.
View DetailsFrequently Asked Questions
1. Which Cable Types Can the DTM-800B Produce?
The machine strands 0.38–1.04 mm bare copper or tinned copper wires into 0.8–16 mm² conductors, and is applied to computer flat cables, audio earphone wires, electronic wires, communication telephone wires, network data cables, automotive wires and wiring harnesses, and general copper conductors.
2. Can Tension Be Adjusted While the Machine Is Running?
Yes. The closed-loop automatic tension control allows tension parameters to be changed without stopping the machine, and tension adapts automatically as the reel fills from empty to full.
3. Does the Machine Need to Be Stopped to Change Stranding Direction?
No. S/Z stranding direction is switched through the PLC + HMI control system, and lay length, rotating speed and direction are set together from the touch screen.
4. What Happens If a Wire Breaks During Production?
The built-in wire break detection triggers a fault alarm and stops the machine automatically, limiting scrap and protecting the wire path and the operator.
5. Is the Machine Tested Before Shipment?
Yes. Commissioning, factory inspection and protective packaging are completed before loading, and installation and commissioning support follows at the customer's site to help production start quickly.
Talk to Jiangsu Handing's Bunching Team
For detailed model selection drawings and technical configuration of the DTM-800B double twist bunching machine, or to discuss a complete cable manufacturing process solution, feel free to contact Handing at any time.
Send your single wire diameter, conductor cross-section range and target cable types, together with your production requirements, to help the engineering team evaluate a suitable configuration.
Contact HandingExplore Solutions





